Olivetti d-Color MF4003 Service Manual page 576

d-Color MF4003/MF3303
[3] External telephone connector (TEL)
[5] Network port (10 Base-T/100 Base-TX/1000 Base-T)
• *1: When local interface kit (EK-P11) is mounted.
1.2 AUTOMATIC DOCUMENT FEEDER SECTION
1.2.1 Configuration
(1) Section Configuration
[1]
[1] Registration section
[3] Scanner section
(2) Main part configuration
[10]
[9]
[8]
[7]
[6]
[5]
[1] DF cooling fan motor (FM4)
[3] Multi feed detection board/1 (transmitter)
[5] Document before read sensor (PS18)
[7] Document registration clutch (CL9)
[9] Document paper feed clutch (CL8)
[11] Upper door sensor (PS20)
[13] DF control board (DFCB)
1.2.2 Paper path
(1) Paper path
• When the start key is pressed, the document main motor drive and the pick-up roller feed the original in.
• The original that fed in is transferred to the paper exit tray via the registration roller, document reading roller and document exit roller.
Service Manual
[4]
[13]
[12]
[11]
[4] [2]
[3]
P THEORY OF OPERATION > 1. d-Color MF4003/MF3303
[4] CS Remote Care connector for modem connection
(RS-232C) *1
- -
[2]
[3]
[2] Paper feed section
[4] Paper exit section
[1]
[2] DF CIS module (DFCIS)
[4] Multi feed detection board/2 (receiver)
[6] After separate sensor (PS16)
[8] Document registration sensor (PS17)
[10] Document empty sensor (PS19)
[12] Document main motor (M8)
-
P-2
Y119930-3