Olivetti d-Color MF4003 Service Manual page 278

d-Color MF4003/MF3303
12. List Output
12.1 Individual list print output
• Output the selected list data on the paper.
• You can select multiple lists. However, only items displayed on the same screen can be selected at a time.
• To be used at the end of setup or when a trouble occurs.
• The output time, day and date will also be printed.
List item
Machine Management List
Adjustments List
Parameter List
Service Parameter
Protocol Trace
Fax Setting List
Fax Analysis List
NOTICE
• When performing Machine Management List output, a detail code history list will be output. This [Detail code] is set to analyze the cause of
the C-FA14 error or the C-E301 error. The refer, to send inquiries to OLI, also send the "detail code history list".
<Procedure>
1. Load the A4S/A4 or 8 1/2 x 11S/8 1/2 x 11 plain paper to a paper source.
2. Select the List item to be output.
3. Select [1-Sided] or [2-Sided].
4. Press the Start key, which will let the machine produce the list.
NOTE
▪ If no item is selected, the Start key has no response.
12.2 Batch list CSV output
• This setting only appears when the following conditions are satisfied.
• [Detail Settings] is selected under [Administrator] -> [Security] -> [USB Connection Permission setting].
• [ON] is selected under [Administrator] -> [Security] -> [USB Connection Permission setting] -> [External Memory (Service)].
• [Administrator] -> [Security] -> [Enhanced Security Mode] is set to "OFF."
• To save various lists data into a USB memory device all together with the CSV format.
• Various list data has its file name in accordance with the following file name rule.
• [2-digit data symbol that corresponds to each list (see the following table) + [_(underscore)] + [13-digit serial number] + [6-digit date
(year, month, and day)] + [2-digit hour] + [2-digit minute].csv
• Compared to output to paper, outputting various lists data to the USB memory device can save time, paper, and toner. With the output
data, analyzing the machine statistically becomes easier.
List of all lists data
Machine Management List
Adjustments List
Parameter List
Service Parameter
Protocol Trace List
Fax Setting List
Network Error Counter List
FAX Activity Report
Management List
Paper Size/Type Counter
Network Settings List
Configuration Page
PCL Font List
PS Font List
Meter Count
<Procedure>
1. Insert the USB memory device to the USB port (for user).
2. Touch [USB save] displayed in the Batch List CSV Output.
3. Press the Start key, the list data are transferred to the USB memory device.
Service Manual
To produce an output of a list of setting values, adjustment values, total counter values, and others.
To produce an output of a list of Software Switch Setting.
To output the adjustment list for machine adjustment, process adjustment, etc. in Service Mode.
Output a nonvolatile parameter list.
Output a FAX Service Mode set value list.
Last The facsimile protocol of the communication which was executed previously is output.
Error Output the facsimile procedure for the last error communication.
Output a FAX user set value list. (Items vary depending on models.)
Following list is output.
• Parameter List
• Machine Management List
• Protocol Trace List (Error)
• Fax Setting List
• Activity Report
• Service Parameter List
Target list
Contents
S1
S2
S3
S4
S5
S6
S7
S8
A1
A2
A3
U1
U2
U3
C1
I-62
I SERVICE MODE > 12. List Output
Data symbol
Y119930-3