V27Ter; V29 - Olivetti d-Color MF4003 Service Manual

d-Color MF4003/MF3303
14.3 Fax Test
• It will be displayed only when the optional fax kit is mounted.
• Specifiable for each line when there are multiple fax lines
Signal Send Test
• Image information signals, control signals and DTMF can be individually output.
• Signal sounds are monitored by the monitor speaker.
Setting item
V34 Main CH
V8
V17

V29

V27ter

V21
PB
DP
Special Tone
Optional Tone
PB Tone (High)
PB Tone (Low)
Pseudo Ring
<Procedure>
1. Touch [Fax Line Test].
2. Select the Line, and touch the [Signal Send Test].
3. Select a test item.
4. Select the parameter you would like to test.
5. Press the Start key. (In order to move to another test, select the next test item after pressing the [Stop] key.)
NOTICE
• Signal is output from pressing [Start] to pressing [Stop].
• To check Line 1, [Administrator] -> [Fax Settings] -> [Line Parameter Setting] -> [Line Monitor Sound] should be set to "ON."
• To check Line 2 to 4, [Administrator] -> [Fax Settings] -> [Multi Line Settings] -> [Fax Line 2 to 4] -> [Line Parameter Setting] -> [Line
Monitor Sound] should be set to "ON."
Signal Receive Test
• Check a signaling tone by connecting the machine to the line to output a test signal of the fax board.
• Signal sounds are monitored by the monitor speaker.
Setting item
V17
V29
V27ter
V21
PB
Service Manual
Setting value
2400 to 33600 (step: 2400)
-
14400 bps
12000 bps
9600 bps
7200 bps
9600 bps
7200 bps
4800 bps
2400 bps
-
0 to 9, *, #, A, B, C, D
0 to 9
1100 Hz
1300 Hz
1650 Hz
2100 Hz
200 to 4000 Hz (step: 100 Hz)
1209 Hz
1336 Hz
1477 Hz
1633 Hz
697 Hz
770 Hz
852 Hz
941 Hz
-
Setting value
14400 bps
12000 bps
9600 bps
7200 bps
9600 bps
7200 bps
4800 bps
2400 bps
-
0 to 9, *, #, A, B, C, D
I-76
I SERVICE MODE > 14. Test Mode
Default setting
33600
CM
○
○
○
-
0
0
○
200 Hz
○
○
-
Default setting
○
○
○
-
0
Y119930-3