Olivetti d-Color MF4003 Service Manual page 142

d-Color MF4003/MF3303
[1]
[2]
[3] [1]
[4]
[1] [2]
9. To reinstall, reverse the order of removal.
4.6 Fan motor
4.6.1 Machine cooling fan (FM1)
1. Remove the rear cover.
F.4.1.3 Rear cover
2. Remove the DC power supply.
F.4.3.4 DC power supply (DCPS)
[2] [1]
[4]
[2] [3]
[1]
Service Manual
[1]
[2]
F DISASSEMBLY/REASSEMBLY > 4. d-Color MF4003/MF3303
5. Remove four screws [1], and evacuate the DF lower guide assy [2].
6. Remove the screw [1], and remove the ground wire from the edge cover [2].
7. Disconnect the connector [3], and remove the harness from the wire saddle [4]
and the edge cover [2].
8. Remove the E-ring [1], and remove the document registration clutch [2].
3. Remove the harness from two wire saddles [1], and disconnect the connector
[2].
4. Remove two screws [1].
5. Remove the claw [2] from the hole [3] in the main body, and remove the
machine cooling fan assy [4].
F-44
Y119930-3