Olivetti d-Color MF4003 Service Manual page 501

d-Color MF4003/MF3303
9.19 T7#
Error Catego Contents of error
code ry
T73 Sendin Fax soft error
g
T74 V.34 communication
disabled due to line
noise
T75 V.34 communication
disabled due to line
noise
T76 V.34 communication
disabled due to line
noise
The remote station is
disconnected.
T77 V.34 communication
disabled due to line
noise
T78 Fax image conversion
error
T79 Fax soft error
9.20 T8#
Error Catego Contents of error
code ry
T80 Sendin Telephone line
g connection error
(Ph.A)
Y119930-3
How to correct
1. Dissolve the high load issues.
2. Turn OFF V.34 if it is limited to V.34 communication.
• For manual input, turn OFF V.34 from Application.
• For abbreviated registration, turn OFF V.34 for
corresponding abbreviated registration.
• If this error occurs frequently, turn OFF V.34 by
service.
3. Change the coding method to MH/MR/MMR.
4. It cannot be dissolved by settings, so acquire a log.
• Protocol trace list for errors (including remote station)
• Line information for both fax machine and remote
station
• Machine management list (CSV save), activity report
• Data saved in the storage
Turn OFF V.34.
• For manual input, turn OFF V.34 from Application.
• For abbreviated registration, turn OFF V.34 for
corresponding abbreviated registration.
• If this error occurs frequently, turn OFF V.34 by
service.
Turn OFF V.34.
• For manual input, turn OFF V.34 from Application.
• For abbreviated registration, turn OFF V.34 for
corresponding abbreviated registration.
• If this error occurs frequently, turn OFF V.34 by
service.
1. Turn OFF V.34.
• For manual input, turn OFF V.34 from Application.
• For abbreviated registration, turn OFF V.34 for
corresponding abbreviated registration.
• If this error occurs frequently, turn OFF V.34 by
service.
2. Check if an error has occurred on the machine on other
end of line first.
Turn OFF V.34.
• For manual input, turn OFF V.34 from Application.
• For abbreviated registration, turn OFF V.34 for
corresponding abbreviated registration.
• If this error occurs frequently, turn OFF V.34 by
service.
1. Turn OFF and ON the main power switch.
2. Change the resolution.
3. Set the coding method to MH/MR/MMR.
4. It cannot be dissolved by settings, so acquire a log.
• Protocol trace list for errors (including remote station)
• Line information for both fax machine and remote
station
• Machine management list (CSV save), activity report
• Data saved in the storage
1. Change the resolution.
2. Set the coding method to MH/MR/MMR.
3. If the error occurs frequently, acquire a log.
• Protocol trace list for errors (including remote station)
• Line information for both fax machine and remote
station
• Machine management list (CSV save), activity report
• Data saved in the storage
How to correct
1. Check it again for proper connection.
L-103
L TROUBLESHOOTING > 9. FAX TROUBLE CODE
Installation position
(Service Mode -> [FAX] -> [Line #])
• -
• -
• [Communication] -> [Protocol] ->
V8/V34 Protocol
[Communication] -> [Others] -> Coding
Ability
-
• -
• -
• [Communication] -> [Protocol] ->
V8/V34 Protocol
• -
• -
• [Communication] -> [Protocol] ->
V8/V34 Protocol
• -
• -
• [Communication] -> [Protocol] ->
V8/V34 Protocol
-
• -
• -
• [Communication] -> [Protocol] ->
V8/V34 Protocol
-
-
[Communication] -> [Others] -> Coding
Ability
-
-
[Communication] -> [Others] -> Coding
Ability
-
Installation position
(Service Mode -> [FAX] -> [Line #])
-
Service Manual