Diagnostics Tool; Nortel Callpilot; 1005R Server Maintenance And Diagnostics; Nn44200-704 01.06 Standard - Nortel CallPilot User Manual

64 Chapter 7 Using CallPilot system utilities
Accessing the system utilities
You can access all CallPilot utilities from the CallPilot server in the Start >
Programs > CallPilot > System Utilities menu.

Diagnostics Tool

Use the Diagnostics Tool to enable or disable CallPilot startup diagnostics.
CallPilot startup diagnostics automatically identify hardware problems
that can exist when the system and its services are started. When you
disable startup diagnostics, you can save time during system maintenance
operations where restarts or call processing services restarts are required.
There are three recommended steps:
•
•
•
To access the Diagnostics Tool
Step
1
To enable startup diagnostics
Step
1
Copyright © 2007, Nortel Networks
.
Use the Diagnostics Tool to turn off CallPilot startup diagnostics.
Perform system maintenance.
Use the Diagnostics Tool to turn on CallPilot startup diagnostics.
Action
On the Windows desktop, click Start > Programs > CallPilot >
System Utilities > Diagnostic Tool.
Result: The Diagnostics Tool dialog box appears.
Action
From the Diagnostics Tool dialog box, select Configuration >
Maintenance Startup Diag > Enable.

Nortel CallPilot

1005r Server Maintenance and Diagnostics

NN44200-704 01.06 Standard

5.0 19 July 2007
• particulars about the CallPilot system, such
as names, keycodes, serial numbers, IP
addresses, and system numbers
—End—
—End—