2
Maintaining the onboard video and network cards
Network card failure
The network cards are integrated into the server board. If the network cards
fail, you must replace the server.
Video card failure
The video card is integrated into the server board. If the video card fails,
you must replace the server.
Indicators for video card failure
If the monitor appears to be functioning but no display is visible, look for the
following indicators of video card malfunction:
•
•
•
•
Copyright © 2007, Nortel Networks
.
When the BIOS window appears, select Server > Event Log
configuration > Clear All Event Logs.
Brightness and contrast are set at normal level.
The server is powered on, and one long beep is followed by two short
beeps.
The DVD combo drive light goes on when the server is powered, but no
display is visible on the monitor.
The DVD combo drive light comes on when you type dir D: and press
Enter, but no display is visible on the monitor.
Nortel CallPilot
1005r Server Maintenance and Diagnostics
NN44200-704 01.06 Standard
5.0 19 July 2007
Maintaining the onboard video and network cards 137
—End—