To Access The Diagnostics Tool; To Enable Startup Diagnostics; To Disable Startup Diagnostics; Diagnostics Tool - Nortel Server 1005r Maintenance And Diagnostics

June 2007

Diagnostics Tool

Use the Diagnostics Tool to enable or disable CallPilot startup
diagnostics. CallPilot startup diagnostics automatically identify
hardware problems that can exist when the system and its services are
started. When you disable startup diagnostics, you can save time during
system maintenance operations where restarts or call processing services
restarts are required. There are three recommended steps:
Use the Diagnostics Tool to turn off CallPilot startup diagnostics.
Perform system maintenance.
Use the Diagnostics Tool to turn on CallPilot startup diagnostics.

To access the Diagnostics Tool

On the Windows desktop, click Start > Programs > CallPilot > System
Utilities > Diagnostic Tool.
Result: The Diagnostics Tool dialog box appears.

To enable startup diagnostics

From the Diagnostics Tool dialog box, select Configuration >
Maintenance Startup Diag > Enable.

To disable startup diagnostics

ATTENTION
1005r Server Maintenance and Diagnostics
Nortel recommends that you leave the startup
diagnostics turned on. When you disable CallPilot
startup diagnostics, you prevent CallPilot from
automatically identifying hardware problems that can
exist when the system and its services are started (for
example, DSP, time switch, or Media Bus).
Using CallPilot system utilities
93