Bios Settings - Nortel CallPilot User Manual

132 Chapter 11 Maintaining the BIOS and system board firmware
8
9
10
11
12

BIOS settings

"BIOS settings" (page 132)
system boots, press F2 to enter the 1005r BIOS. BIOS Settings that are in
bold text are settings that are modified by Nortel.
BIOS settings
Main
Advanced
Copyright © 2007, Nortel Networks
.
Result: The system reboots and the Startup Menu appears.
Enter 3 to run Utilities (BIOS, Firmware, etc...) from the Startup
Menu and press Enter. If the Startup Menu is not displayed, refer to
"To display the Nortel CallPilot Image Menu" (page
Enter 3 to run 1005r server Board Management Controller (BMC)
firmware update from the Nortel CallPilot Image Menu.
Result: The system prompts you to confirm the BMC update.
Enter Y to confirm.
Result: The BMC update progress dialog box appears with the
following message:
System will now reboot.
Press any key to continue...
Remove the Image DVD from the DVD combo drive and enter any
key.
Result: The system reboots.
The BIOS upgrade is complete.
Set the Date and the language to English
Processor Configuration
IDE Configuration
Nortel CallPilot
1005r Server Maintenance and Diagnostics
NN44200-704 01.06 Standard
5.0 19 July 2007
—End—
displays the 1005r server BIOS settings. As the
Processor Re-test: Disabled
Max CPU ID Value Limit: Disabled
Hyper treading Technology: Enabled
HT Technology in MPS: ENABLED
Execute Disable Bit: Enabled
Hardware Prefetcher: Disabled
Adjacent Cache Line Prefetch:
Disabled
Onboard P-ATA Channels:
PRIMARY
Onboard S-ATA Channels:
DISABLED
Primary IDE master: ATAPI CDROM
Primary IDE slave: Not Detected
130).