Nortel CallPilot User Manual page 87

8
9
10
11
12
13
Copyright © 2007, Nortel Networks
.
Turn the riser card upside down and place it on a table.
Low-riser PCI card
Release the retention bar (A).
Replace the card in either slot 2 or 3 (the two upper slots in the
preceding diagram and not the lower slot as shown).
Lock the retention bar in place.
Turn the PCI riser card right-side up.
Arrange the PCI riser assembly red power cable as shown in the
following illustration to avoid pinching the cable when you put the
riser assembly into the chassis.
PCI riser assembly power cord
Nortel CallPilot
1005r Server Maintenance and Diagnostics
NN44200-704 01.06 Standard
5.0 19 July 2007
Replacing the dual NIC card 87