7
8
Copyright © 2007, Nortel Networks
.
DS30X cables for high capacity
Note: If you have the high capacity configuration with three
MPB96 cards, label each cable with the MPB96 slot number
before disconnecting. Incorrectly connected MPB96 cards do
not answer calls.
Disconnect the SCSI cable attached to the RAID card.
SCSI cable attached to RAID card
Lift the blue tabs and pull up on the riser to remove the riser card
assembly from the chassis.
Nortel CallPilot
1005r Server Maintenance and Diagnostics
NN44200-704 01.06 Standard
5.0 19 July 2007
Replacing an MPB96 board 115