Viewing The Last Diagnostics Result - Nortel CallPilot User Manual

1
2
3
4
5
6
7
8
9

Viewing the last diagnostics result

You can review the results of diagnostics by clicking the Get Last Results
button for a component.
To view the last diagnostics result
Step
Nortel recommends that you courtesy stop rather than stop a component if
possible. For instructions, see
Copyright © 2007, Nortel Networks
.
Run CallPilot Manager and log on.
In CallPilot Manager, click Maintenance > Maintenance Admin.
Result: The Maintenance screen appears.
Click the plus sign (+) beside the CallPilot server to expand the
component tree.
Continue clicking the plus signs (+) until the component you want to
work with is visible.
Click the hardware component for which you want to run diagnostics
with.
Result: The Maintenance screen refreshes to show details about
the component.
Scroll down to the Maintenance section, and ensure that the
component is out of service.
Scroll down to the Diagnostics section.
Select the check box for each diagnostic that you want to run.
Note: If you want to run all of the diagnostics, select the
Diagnostic Description check box at the top of the list.
Click Run.
Result: A new Web browser window appears with the progress
and results of the diagnostics.
Note: The Diagnostic Results box in the Diagnostics section
appears when you click Get Last Result.
Action
Nortel CallPilot
1005r Server Maintenance and Diagnostics
NN44200-704 01.06 Standard
5.0 19 July 2007
Viewing the last diagnostics result 57
—End—
ATTENTION
"Starting and stopping components" (page 53).