Nortel CallPilot User Manual page 123

9
10
11
12
Copyright © 2007, Nortel Networks
.
PCI riser card assembly
Turn the riser card upside down and place it on a table.
Release the retention clip by loosening the blue captive screw (A).
Remove the rear retention screw (B).
Add the new boards to slots 2 and 3. Tighten the retaining screws
(B). Make sure the red power cable is not pinched.
Nortel CallPilot
1005r Server Maintenance and Diagnostics
NN44200-704 01.06 Standard
5.0 19 July 2007
Upgrading to high capacity 123