Nortel CallPilot User Manual page 135

This tool is only intended for use by authorized level 2 support personnel under
Nortel supervision.
The system event logs can only hold 2000 events and display a warning
message when full. You must clear the logs to turn off the warning message.
Refer to
Even if your system is not operational, you can save the system event logs
to an optional USB media drive. Your support representative can use the
logs to diagnose hardware faults. Refer to
USB media drive" (page
To view system event logs
Step
1
2
3
4
5
6
7
8
9
Copyright © 2007, Nortel Networks
.
"To clear system event logs" (page
136).
Action
Boot from the CallPilot Image DVD and display the Nortel CallPilot
Image Menu that lists the utilities. Refer to
CallPilot Image Menu" (page
Enter 5 to run the 1005r system utility and SEL viewer from the
Nortel CallPilot Image Menu.
Enter Y to confirm that you want to run the utility.
Result: The Intel GUI screen appears.
Note: The Intel GUI is not a Windows-based screen.
Click Continue.
Choose Server Configuration Utilities and click Continue.
Choose Run SEL Viewer Utility and click Continue.
Result: The SEL Viewer screen appears.
Use the arrow keys to scroll through the system events. The details
of the currently selected event appear on the bottom of the screen.
When you finish viewing events, select File > Exit from the menu bar.
Result: The Intel GUI appears.
Click Exit to close the GUI.
Nortel CallPilot
1005r Server Maintenance and Diagnostics
NN44200-704 01.06 Standard
5.0 19 July 2007
Using system event logs 135
ATTENTION
136).
"To save system event logs to a
"To display the Nortel
130).
—End—