Using System Event Logs; Nortel Callpilot; 1005R Server Maintenance And Diagnostics; Nn44200-704 01.06 Standard - Nortel CallPilot User Manual

134 Chapter 11 Maintaining the BIOS and system board firmware
Security
Server

Using system event logs

The system event logs record all the hardware events that take place while
the system boots up and functions. You can view these logs even when the
system is not operational through the utilities on the CallPilot Image DVD.
Copyright © 2007, Nortel Networks
.
Hard Disk Drives
Removable Media
ATAPI CD-ROM Drive
All Features Disabled
This is a view only menu
Serial Power Console
Event Log Configuration
Power Management Features
Assert NMI on SERR: DISABLED
Assert NMI on PERR: Enabled
Resume on AC Power Loss: POWER
ON
FRB -2 Policy: Disable BSP
Late POST Timeout: Disabled
Hard Disk OS Boot Timeout: Disabled
PXE OSBoot Timeout: Disabled
OS Watchdog Timer policy: RESET
Platform Event Filtering: Enabled

Nortel CallPilot

1005r Server Maintenance and Diagnostics

NN44200-704 01.06 Standard

5.0 19 July 2007
PCI Bus 03 Device 09 RAID Adapter
There should be no removable media
Sony CD-ROM/DVD-ROM
BIOS Redirection Port: Disabled
Baud Rate 19.2k
Flow Control: CTS/RTS
Terminal Type: VT100+
ACPI Redirection: Disabled
Serial Port Console: Serial B
Clear All Event Logs: Disabled
Clear event Log When Full: Disabled
BIOS Event Logging: Enabled
Critical Event Logging: Enabled
ECC Event Logging: Enabled
PCI Error Logging: Enabled
FSB Error Logging: Enabled
Hublink Error Logging: Enabled
Time Stamp clock sync Event:
Enabled
Wake On LAN (S5 Only): Enabled