Nortel CallPilot User Manual page 61

3
4
Copyright © 2007, Nortel Networks
.
Do one of the following:
IF you want to stop or start
all of the channels associated with
a DS30X link
only one or several channels that
are associated with a DS30X link
Click Courtesy Stop or Start as required.
Result: If you click Courtesy Stop or Start, you are asked to confirm
the Courtesy Stop or Start. Click OK.
The selected channels change to off-duty or idle status, according
to the action you chose.
Note: If the buttons are not available, wait a few seconds for
the screen to refresh.
Nortel CallPilot
1005r Server Maintenance and Diagnostics
NN44200-704 01.06 Standard
5.0 19 July 2007
Working with the Channel Monitor 61
THEN
select the check box to the left of
the DS30X link that you want to
stop or start.
Repeat this step for each DS30X
link.
select the check box for each
channel that you want to stop or
start.
—End—