RH2288H V3 Server
User Guide
Figure 7-161 Installing fan module brackets
Step 9 Install the fan modules. For details, see
Step 10 Install the air duct. For details, see
Step 11 Install full-height full-length riser cards if they are required. For details, see
Installing a Riser
Step 12 Install the chassis cover. For details, see
Step 13 Install the RH2288H V3. For details, see
Step 14 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 15 Power on the RH2288H V3. For details, see
----End
7.65 Removing the Right Mounting Ear
Remove the right mounting ear if it has failed.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Step 3 Power off the RH2288H V3. For details, see
Step 4 Remove all external cables such as power and network cables.
Issue 46 (2022-12-28)
Card.
Cables.
Copyright © Huawei Technologies Co., Ltd.
7.16 Installing a Fan
7.14 Installing the Air
7.12 Installing the Chassis
3.4 Installing the
4.1 Powering On the
1 Safety
Instructions.
4.2 Powering Off the
7 Replacing Parts
Module.
Duct.
7.20
Cover.
Server.
3.5
Server.
Server.
292