Huawei RH2288H V3 User Manual page 186

RH2288H V3 Server
User Guide
Figure 7-28 Installing a fan module
Step 5 Close the memory window on the air duct. See (2) in
Step 6 Install full-height full-length riser cards if they are required. For details, see
Installing a Riser
Step 7 Install the chassis cover. For details, see
Step 8 Install the RH2288H V3. For details, see
Step 9 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 10 Power on the RH2288H V3. For details, see
----End
Issue 46 (2022-12-28)
NO TE
Fan modules support hot swap. You do not need to perform
can open the chassis cover without removing the server. The scenarios include but are not
limited to: (1) the server is installed on holding or adjustable guide rails, and (2) the server
is not installed in a cabinet.
Card.
Cables.
Copyright © Huawei Technologies Co., Ltd.
Step 8
Figure
7.12 Installing the Chassis
3.4 Installing the Server.
4.1 Powering On the
7 Replacing Parts
to Step 10 when you
7-28.
7.20
Cover.
3.5
Server.
173