Huawei RH2288H V3 User Manual page 288

RH2288H V3 Server
User Guide
Step 3 Take the spare rear drive backplane out of its ESD bag.
Step 4 Insert the rear drive backplane in the arrow direction as far as it will go, and
tighten the screw to secure the rear drive backplane. See (1) and (2) in
7-141.
Figure 7-141 Installing a rear drive backplane
Step 5 Install a rear drive module into the chassis and tighten the screws. See
7-142.
Figure 7-142 Installing a rear drive module
Step 6 Connect cables to the rear drive backplane.
Figure 7-143
inch drives, and
If the server uses both 3.5-inch drives and 2.5-inch drives, refer to both two figures
for cable connections.
The ports with the same number are connected to each other. The tables below
list the meanings of the ports.
Issue 46 (2022-12-28)
shows the cable connections to the rear drive backplane for all 3.5-
Figure 7-144 shows the cable connections for all 2.5-inch drives.
Copyright © Huawei Technologies Co., Ltd.
7 Replacing Parts
Figure
Figure
275