Installing A Flexio Card - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide

7.46 Installing a FlexIO Card

Install a FlexIO card if a FlexIO card has failed or needs to be replaced with a new
model.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Remove the FlexIO card to be replaced. For details, see
Card.
Step 3 Take the spare FlexIO card out of its ESD bag.
Step 4 (Optional) Install the baffle plate of the FlexIO card.
Do not insert the baffle plate onto the FlexIO card horizontally. Otherwise, the
pins of the network ports may be damaged.
1.
2.
3.
Issue 46 (2022-12-28)
NO TE
If no baffle plate is delivered with the spare FlexIO card, use the baffle plate removed from
the original FlexIO card.
NO TICE
Hold the baffle plate with one hand and the two sides of the FlexIO card with
the other hand. Tilting the FlexIO card a little bit to prevent collision of the
screw holes of the baffle plate and the network port pins, insert the FlexIO
card into the baffle plate in the direction shown by (1) in
Ensure that the pins at the rear of the FlexIO card are beyond the screw holes.
Close the baffle plate in the direction shown by (2) in
the FlexIO card horizontally into the baffle plate as far as it will go.
Use a Phillips screwdriver to tighten the screws to secure the baffle plate with
the FlexIO card. See (3) in
depending on the FlexIO card model.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Instructions.
Figure 7-104. The positions of the screws vary
7 Replacing Parts
7.45 Removing a FlexIO
Figure 7-104.
Figure 7-104, and push
242