Huawei RH2288H V3 User Manual page 225

RH2288H V3 Server
User Guide
Step 9 Perform the following operations based on the chip model of the RAID controller
card connected to the supercapacitor.
●
Figure 7-70 Removing the supercapacitor (LSI SAS3108)
1.
2.
3.
●
Issue 46 (2022-12-28)
If the chip model of the RAID controller card is LSI SAS3108, remove the trans
flash module (TFM) first.
Loosen the screws on the TFM. See step (1) in
Lift the TFM out of the RAID controller card. See step (2) in
Remove the cable between the supercapacitor and the TFM. See step (3) in
Figure 7-70.
If the chip model of the RAID controller card is PM8060, remove the cable
between the supercapacitor and the RAID controller card. See step (1) in
Figure 7-71.
Copyright © Huawei Technologies Co., Ltd.
7 Replacing Parts
Figure 7-70.
Figure 7-70.
212