Installing An Internal Cable - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
Step 10 Press and hold down the latches on both sides of a fan module bracket, and lift
the fan support. Use the same method to lift the other fan module bracket. See
Figure
Figure 7-30 Removing a fan module bracket
Step 11 Remove the cable to be removed.
Step 12 Place the removed cable in an ESD bag.
----End

7.18 Installing an Internal Cable

Install an internal cable to replace the original one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Remove the cable to be replaced. For details, see
Cable.
Step 3 Take a spare cable out of the ESD bag.
Step 4 Install the spare cable. For details about cable port positions, see
Cabling.
Step 5 Install fan module brackets in the chassis. See
Issue 46 (2022-12-28)
7-30.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Instructions.
7.17 Removing an Internal
Figure 7-31.
7 Replacing Parts
2.7 Internal
175