Removing An M.2 Sata Ssd Card - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
Figure 7-167 Installing fan module brackets
Step 10 Install the fan modules. For details, see
Step 11 Install the air duct. For details, see
Step 12 Install full-height full-length riser cards if they are required. For details, see
Installing a Riser
Step 13 Install the chassis cover. For details, see
Step 14 Install the RH2288H V3. For details, see
Step 15 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 16 Power on the RH2288H V3. For details, see
----End

7.67 Removing an M.2 SATA SSD Card

Remove an M.2 SATA SSD card if it has failed.
An M.2 SSD riser card can be configured with two M.2 SATA SSD cards. The
replacement method is the same for the two M.2 SATA SSD cards.
This section uses the M.2 SATA SSD card corresponding to SATA1 port as an
example.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Issue 46 (2022-12-28)
Card.
Cables.
Copyright © Huawei Technologies Co., Ltd.
7.16 Installing a Fan
7.14 Installing the Air
7.12 Installing the Chassis
3.4 Installing the
4.1 Powering On the
1 Safety Instructions.
7 Replacing Parts
Module.
Duct.
7.20
Cover.
Server.
3.5
Server.
297