Huawei RH2288H V3 User Manual page 35

RH2288H V3 Server
User Guide
Silkscreen
-
-
Table 2-6
panel.
Issue 46 (2022-12-28)
Meaning
NMI button
Drive activity
indicator
Drive fault
indicator
Network port
link status
indicators
describes the NVMe PCIe SSD indicators on the RH2288H V3 front
Copyright © Huawei Technologies Co., Ltd.
State Description
The NMI button triggers a server to
generate a non-maskable interrupt. You
can press this button or control it remotely
on the iBMC WebUI.
NOTE
● Use the NMI button only when the OS is
abnormal. Do not use this button when the
server is operating properly.
● Use the NMI button only for internal
commissioning. Before using this button,
ensure that the OS has the NMI processing
program. Otherwise, the OS may crash.
Exercise caution when using this button.
● Off: The drive is not detected or is
faulty.
● Blinking green: Data is being read from
or written to the drive, or synchronized
between drives.
● Steady green: The drive is inactive.
● Off: The drive is working properly.
● Blinking yellow: The drive is located, or
RAID is building rebuilt.
● Steady yellow: The drive is faulty, or a
drive member drive in the RAID array is
faulty.
NOTE
If the fault indicator is steady yellow, run related
commands to check the RAID status to
determine whether the RAID array status is
abnormal or whether the drive is faulty. For
details about command description, see
V2 and V3 Server RAID Controller Card User
Guide
.
The indicators show the status of each
Ethernet port on the FlexIO card.
● Steady green: The port is properly
connected.
● Off: The port is not in use or faulty.
NOTE
If the FlexIO card provides two network ports,
they correspond to network port indicators 1
and 2 on the front panel.
2 Overview
Huawei
22