RH2288H V3 Server
User Guide
Figure 7-151 Installing fan module brackets
Step 11 Install the fan modules. For details, see
Step 12 Install the air duct. For details, see
Step 13 Install the chassis cover. For details, see
Step 14 Install the RH2288H V3. For details, see
Step 15 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 16 Power on the RH2288H V3. For details, see
----End
Server with Eight 2.5-inch Hard Disks
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Remove the VGA board to be replaced. For details, see
Board.
Step 3 Take the spare VGA board out of its ESD bag.
Step 4 Insert the VGA board into the tray. See step (1) in
Issue 46 (2022-12-28)
Cables.
Copyright © Huawei Technologies Co., Ltd.
7.16 Installing a Fan
7.14 Installing the Air
7.12 Installing the Chassis
3.4 Installing the
4.1 Powering On the
1 Safety
Instructions.
7.59 Removing the VGA
Figure
7 Replacing Parts
Module.
Duct.
Cover.
Server.
Server.
7-152.
3.5
283