Huawei RH2288H V3 User Manual page 253

RH2288H V3 Server
User Guide
Figure 7-102 Removing the FlexIO card
Step 10 Pull out part of the FlexIO card to have the FlexIO card disconnected from the
port on the mainboard. Remove the FlexIO from of the server. See (2) in
7-102.
Step 11 (Optional) Remove the baffle plate from the FlexIO card.
When removing the baffle plate from the FlexIO card, do not pull out the FlexIO
card horizontally. Otherwise, the pins of the network ports may be damaged.
1.
2.
Issue 46 (2022-12-28)
NO TE
If no baffle plate is delivered with the spare FlexIO card, remove the baffle plate from the
FlexIO card for future use.
NO TICE
Use a Phillips screwdriver to loosen the screws that secure the baffle plate
with the FlexIO card. See (1) in
depending on the FlexIO card model.
Keeping the FlexIO card horizontally level, hold the baffle plate with one
hand and the two sides of the FlexIO card with the other hand. Pull apart the
baffle plate in the direction shown by (2) in
Copyright © Huawei Technologies Co., Ltd.
Figure 7-103. The positions of the screws vary
Figure 7-103. Check whether the
7 Replacing Parts
Figure
240