Huawei RH2288H V3 User Manual page 277

RH2288H V3 Server
User Guide
The server can be installed with one or two SD cards, which are monitored by the
iBMC. If the iBMC detects two SD cards when completing initialization, the iBMC
automatically configures the two SD cards as a RAID 1 array. You can view
information about the SD cards and RAID 1 array on the iBMC WebUI by choosing
System Info > Other. However, you cannot modify the configuration. The two SD
cards in the RAID 1 array are mirrored with each other. If the SD card to be
installed contains data, data overwriting will occur. Therefore, before installing an
SD card, ensure that the SD card contains no data.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the SD card to be replaced.
two SD cards. SD card 1 is above the SD card board, and SD card 2 is below the
SD card board.
Figure 7-130 SD card position
Step 3 Remove the SD card to be replaced. For details, see
Step 4 Take the spare SD card out of its ESD bag.
Step 5 If SD card 2 needs to be installed, remove the SD card board first. For details, see
7.51 Removing an SD
Issue 46 (2022-12-28)
NO TE
Ensure that the spare microSD card contains no data.
Card.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Instructions.
Figure 7-130 shows the positions of the
7.51 Removing an SD
7 Replacing Parts
Card.
264