Installing A Riser Card - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
Step 9 Remove the PCIe cards from the riser card tray. For details, see
PCIe Card from a Riser
Step 10 Loosen the screw on the riser card. See step (1) in
Figure 7-34 Removing a riser card
Step 11 Pull the riser card in the arrow direction to remove it. See step (2) in
Step 12 Place the removed riser card in the ESD bag.
----End

7.20 Installing a Riser Card

Install a riser card to replace the original one or add new PCIe cards.
You can insert only a riser card into the riser card slot on the mainboard, but
cannot directly insert a PCIe card into this slot.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Remove the riser card to be replaced. For details, see
Card.
Step 3 Take the spare riser card out of its ESD bag.
Step 4 Push the riser card in the arrow direction until it does not move. See step (1) in
Figure
Issue 46 (2022-12-28)
Card.
7-35.
Copyright © Huawei Technologies Co., Ltd.
Figure 7-34.
1 Safety Instructions.
7.19 Removing the Riser
7 Replacing Parts
7.21.1 Removing a
Figure 7-34.
178