Removing A Mainboard - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
Figure 7-92 Installing a DIMM
Step 6 Install the air duct. For details, see
Step 7 Install the supercapacitor if it is required. For details, see
Supercapacitor (Screw-in RAID Controller
Step 8 Install full-height full-length riser cards if they are required. For details, see
Installing a Riser
Step 9 Install the chassis cover. For details, see
Step 10 Install the RH2288H V3. For details, see
Step 11 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 12 Power on the RH2288H V3. For details, see
----End

7.43 Removing a Mainboard

Remove a mainboard if it has failed.
Procedure
Step 1 Confirm the iBMC and BIOS configurations with the customer for quick recovery
after replacing the motherboard.
Step 2 Log in to the iBMC and record the firmware (iBMC, BIOS, and CPLD) versions of
the mainboard to be replaced. (Choose Information > System Info > Mainboard
Info on the iBMC WebUI or run the ipmcget -d version command on the iBMC
CLI.)
Step 3 (Optional) Export the iBMC and BIOS configuration files. For details, see "Import/
Export" in
Issue 46 (2022-12-28)
Card.
Cables.
Huawei Rack Server iBMC User Guide
Copyright © Huawei Technologies Co., Ltd.
7.14 Installing the Air
Card).
7.12 Installing the Chassis
3.4 Installing the
4.1 Powering On the
. After replacing the mainboard,
7 Replacing Parts
Duct.
7.37 Installing the
7.20
Cover.
Server.
Server.
3.5
230