Installing A Tpm - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
Step 11 Place the removed TPM in an ESD bag.
----End

7.24 Installing a TPM

Install a TPM to replace the original one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Remove the TPM to be replaced. For details, see
Step 3 Take a spare TPM out of its ESD bag.
Step 4 Insert the TPM vertically downwards into the connector on the mainboard. See (1)
in
Figure 7-46 Installing the TPM
Step 5 Tighten the screw on the TPM using a Phillips screwdriver. See (2) in
Step 6 Install the riser card above the TPM. For details, see
Step 7 Install the chassis cover. For details, see
Step 8 Install the RH2288H V3. For details, see
Step 9 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 10 Power on the RH2288H V3. For details, see
Issue 46 (2022-12-28)
Figure 7-46.
Cables.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Instructions.
7.23 Removing a
7.20 Installing a Riser
7.12 Installing the Chassis
3.4 Installing the Server.
4.1 Powering On the
7 Replacing Parts
TPM.
Figure 7-46.
Card.
Cover.
3.5
Server.
189