Removing The Vga Board - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
Step 10 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 11 Power on the RH2288H V3. For details, see
----End

7.59 Removing the VGA Board

Remove the video graphics array (VGA) board if it has failed.
With Eight 3.5-inch Hard Disks
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Step 3 Power off the RH2288H V3. For details, see
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288H V3 and put it on an ESD desktop. For details, see
Removing the
Step 6 Remove the chassis cover. For details, see
Step 7 Remove the air duct. For details, see
Step 8 Remove all fan modules. For details, see
Step 9 Press and hold down the latches on both sides of a fan module bracket, and lift
the bracket. Use the same method to lift the other fan module bracket. See steps
(1) and (2) in
Figure 7-145 Removing fan module brackets
Issue 46 (2022-12-28)
Cables.
Server.
Figure 7-145.
Copyright © Huawei Technologies Co., Ltd.
4.1 Powering On the
1 Safety Instructions.
4.2 Powering Off the
7.11 Removing the Chassis
7.13 Removing the Air
7.15 Removing a Fan
7 Replacing Parts
3.5
Server.
Server.
3.6
Cover.
Duct.
Module.
277