RH2288H V3 Server
User Guide
Figure 7-14 Removing a PSU
Step 5 Pull the PSU completely out of the slot. See (2) in
----End
7.10 Installing a PSU
7.10.1 Installing an AC PSU
Install an AC PSU to replace the original one.
An AC PSU needs to be added to improve reliability when only one AC PSU is
configured for the RH2288H V3.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Remove the PSU to be replaced. For details, see
Step 3 Take the spare AC PSU out of its ESD bag.
Step 4 Push the spare AC PSU along the guide rails into a slot until the PSU clicks into
place. The PSU latch snaps in so that the PSU does not move. See
Issue 46 (2022-12-28)
Copyright © Huawei Technologies Co., Ltd.
Figure
7-14.
1 Safety
Instructions.
7.9.1 Removing an AC
7 Replacing Parts
PSU.
Figure
7-15.
161