Huawei RH2288H V3 User Manual page 260

RH2288H V3 Server
User Guide
Figure 7-108 Removing the LCD
Step 15 Push the LCD out of the LCD support in the arrow direction to remove it. See step
(2) in
Step 16 Push the LCD out of the LCD support in the arrow direction to remove it. See step
(2) in
----End
Server with Eight 2.5-inch Hard Disks
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Step 3 Power off the RH2288H V3. For details, see
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288H V3 and put it on an ESD desktop. For details, see
Removing the
Step 6 Remove the chassis cover. For details, see
Step 7 Remove full-height full-length riser cards if they are installed. For details, see
Removing the Riser
Step 8 Remove the air duct. For details, see
Step 9 Remove the fan modules. For details, see
Step 10 Press and hold down the latches on both sides of a fan support, and lift the fan
support. See steps (1) and (2) in
Issue 46 (2022-12-28)
Figure 7-108.
Figure 7-108.
Server.
Card.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Instructions.
4.2 Powering Off the
7.11 Removing the Chassis
7.13 Removing the Air
7.15 Removing a Fan
Figure 7-109.
7 Replacing Parts
Server.
3.6
Cover.
7.19
Duct.
Module.
247