RH2288H V3 Server
User Guide
Figure 7-64 Removing the RAID controller card
Step 12 Lift the RAID controller card slowly out of the server. See step (2) in
Step 13 Place the removed RAID controller card in an ESD bag.
----End
7.32 Installing a Screw-in RAID Controller Card
Install a screw-in RAID controller card to replace the original one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Remove the RAID controller card to be replaced. For details, see
the Screw-in RAID Controller
Step 3 Take the spare RAID controller card out of its ESD bag.
Step 4 (Optional) Remove the rubber plugs from the ports on the RAID controller card if
any. See
Issue 46 (2022-12-28)
Figure
7-65.
Copyright © Huawei Technologies Co., Ltd.
1 Safety
Instructions.
Card.
7 Replacing Parts
Figure
7-64.
7.31 Removing
205