Huawei RH2288H V3 User Manual page 280

RH2288H V3 Server
User Guide
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Step 3 Power off the RH2288H V3. For details, see
Step 4 Remove all external cables, such as power cables and network cables.
Step 5 Remove the RH2288H V3 and place the removed RH2288H V3 on the ESD
desktop. For details, see
Step 6 Remove the chassis cover. For details, see
Step 7 Loosen the two screws. See step (1) in
Figure 7-133 Removing an SD card board
Step 8 Lift the SD card board till its connector is disconnected from the mainboard. See
step (2) in
Step 9 Remove the SD card from the SD card board. For details, see
SD
Issue 46 (2022-12-28)
Figure 7-133.
Card.
NO TE
SD card 1 is above the SD card board, and SD card 2 is below the SD card board.
Copyright © Huawei Technologies Co., Ltd.
1 Safety
4.2 Powering Off the
3.6 Removing the Server.
7.11 Removing the Chassis
Figure
7 Replacing Parts
Instructions.
Server.
7-133.
7.51 Removing an
Cover.
267