Huawei RH2288H V3 User Manual page 258

RH2288H V3 Server
User Guide
Server with Eight 3.5-inch Hard Disks
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Step 3 Power off the RH2288H V3. For details, see
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288H V3 and put it on an ESD desktop. For details, see
Removing the
Step 6 Remove the chassis cover. For details, see
Step 7 Remove full-height full-length riser cards if they are installed. For details, see
Removing the Riser
Step 8 Remove the air duct. For details, see
Step 9 Remove the fan modules. For details, see
Step 10 Press and hold down the latches on both sides of a fan support, and lift the fan
support. Use the same method to lift the other fan support. See steps (1) and (2)
in
Figure 7-106 Removing a fan support
Step 11 Remove the cable between the LCD and the video graphics array (VGA) port. See
step (1) in
Issue 46 (2022-12-28)
Server.
Card.
Figure 7-106.
Figure 7-107.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Instructions.
4.2 Powering Off the
7.11 Removing the Chassis
7.13 Removing the Air
7.15 Removing a Fan
7 Replacing Parts
Server.
3.6
Cover.
7.19
Duct.
Module.
245