Installing The Right Mounting Ear - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
Step 13 Loosen the screws on the right mounting ear. See step (3) in
Step 14 Remove the right mounting ear in the arrow direction and slowly pull the
mounting ear signal cable out of the chassis along the chassis interior surface. See
step (4) in
Step 15 Place the removed right mounting ear in an ESD bag.
----End

7.66 Installing the Right Mounting Ear

Install a right mounting ear to replace the faulty one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Remove the right mounting ear to be replaced. For details, see
the Right Mounting
Step 3 Take the spare right mounting ear out of its ESD bag.
Step 4 Route the mounting ear signal cable through the chassis in the arrow direction.
See step (1) in
Figure 7-165 Installing the right mounting ear
Step 5 Remove the adhesive backing from the signal cable and route the signal cable
along the grooves within the chassis. Bend the signal cable along its black lines.
See
Issue 46 (2022-12-28)
Figure 7-164.
Ear.
Figure 7-165.
Figure 7-166.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Instructions.
7 Replacing Parts
Figure 7-164.
7.65 Removing
295