Removing The Riser Card - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
Step 7 Install the air duct. For details, see
Step 8 Install the chassis cover. For details, see
Step 9 Install the RH2288H V3. For details, see
Step 10 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 11 Power on the RH2288H V3. For details, see
----End

7.19 Removing the Riser Card

Remove the riser card before replacing it with a new one, replacing the RAID
controller card, or replacing the mainboard.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Step 3 Power off the RH2288H V3. For details, see
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288H V3 and put it on an ESD desktop. For details, see
Removing the
Step 6 Remove the chassis cover. For details, see
Step 7 (Optional) Remove all cables from the riser card if any.
Step 8 Lift the riser card tray. See
Figure 7-33 Removing a riser card tray
Issue 46 (2022-12-28)
Cables.
Server.
Figure
Copyright © Huawei Technologies Co., Ltd.
7.14 Installing the Air
7.12 Installing the Chassis
3.4 Installing the
4.1 Powering On the
1 Safety Instructions.
4.2 Powering Off the
7.11 Removing the Chassis
7-33.
7 Replacing Parts
Duct.
Cover.
Server.
3.5
Server.
Server.
3.6
Cover.
177