Huawei RH2288H V3 User Manual page 237

RH2288H V3 Server
User Guide
Figure 7-84 Smeared thermal compound layer
Step 11 Squeeze two sides of the CPU carrier (shown in
with the CPU inside.
Figure 7-85 Positions for squeezing a CPU carrier
Step 12
● To prevent damage to the CPU, CPU socket, or mainboard, ensure that the
● When you close the securing rod, do not exert excessive force or touch any
● Do not move the CPU if it is not correctly placed to avoid any twisted pins. Lift
Hold the CPU carrier with the CPU inside horizontally, align the triangle on the
CPU with the triangle on the CPU socket, and place the carrier vertically
Issue 46 (2022-12-28)
NO TICE
securing rod on the CPU socket is fully open before you install the CPU in the
socket.
components and gild pins on the CPU.
the CPU until it is out of the socket, and then place it in the socket properly.
Copyright © Huawei Technologies Co., Ltd.
7 Replacing Parts
Figure 7-85) and raise the carrier
224