Huawei RH2288H V3 User Manual page 217

RH2288H V3 Server
User Guide
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288H V3 and put it on an ESD desktop. For details, see
Removing the
Step 6 Remove the chassis cover. For details, see
Step 7 Remove full-height full-length riser cards if they are installed. For details, see
Removing the Riser
Step 8 Remove the supercapacitor if it is installed. For details, see
Supercapacitor (Screw-in RAID Controller
Step 9 Determine the position of the RAID controller card. See
Figure 7-63 Position of the RAID controller card
Step 10 Hold down the latches on the cables to the RAID controller card, and remove the
cables from the RAID controller card. For details, see
Step 11 Loosen the screws on the RAID controller card. See step (1) in
Issue 46 (2022-12-28)
Server.
Card.
Copyright © Huawei Technologies Co., Ltd.
7.11 Removing the Chassis
7.35 Removing the
Card).
Figure
2.7 Internal
7 Replacing Parts
3.6
Cover.
7.19
7-63.
Cabling.
Figure 7-64.
204