Configuring Raid - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide

5.4 Configuring RAID

Before configuring RAID, you need to obtain the IP address of the iBMC
management network port, and the user name and password for logging in to the
iBMC WebUI. For details about how to obtain the IP address for the management
network port and how to operate the iBMC, see
Guide
Procedure
View the RAID controller card information on the iBMC WebUI.
1.
2.
3.
Issue 46 (2022-12-28)
Mainboard BoardID:
Mainboard PCB:
------------------- NIC INFO -------------------
SM211 BoardID:
SM211 PCB:
--------------- Riser Card INFO ----------------
BC11PERK BoardID:
BC11PERL BoardID:
-------------- HDD Backplane INFO --------------
BC11EHBD BoardID:
BC11EHBD PCB:
BC11EHBD CPLD Version:
▪
CPLD Version: CPLD version of the RH2288H V3.
▪
BIOS Version: BIOS version of the RH2288H V3.
▪
Active iBMC Version: active iBMC version of the RH2288H V3.
▪
Backup iBMC Version: backup iBMC version of the RH2288H V3.
c. Query the health status for the RH2288H V3.
iBMC / # ipmcget -d health
System in health state
▪
If the message "System in health state" is displayed, no further
action is required.
▪
If an alarm is generated, clear the alarm by performing
d. Query alarms for the RH2288H V3.
iBMC:/->ipmcget -d healthevents
System in health state
e. Clear alarms. For details, see
Handling
.
.
Log in to the iBMC WebUI.
For details, see 9.2 Logging In to the iBMC
Choose Information on the menu bar and choose Component Info or
System Info in the navigation tree. The Component Info or System Info
page is displayed.
View the RAID controller card information, as shown in
5-6.
Copyright © Huawei Technologies Co., Ltd.
0x000f
.B
0x0017
.A
0x0084
0x0085
0x0079
.A
(U3)1.02
Huawei Rack Server iBMC Alarm
Huawei Rack Server iBMC User
WebUI.
5 Configuring the RH2288H V3
d and e.
Figure 5-5 or Figure
127