Removing The Internal Usb Flash Drive - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
Step 8 Use a Phillips screwdriver to tighten the screws. See step (2) in
Step 9 Connect the cables from the DVD drive to the mainboard and the front hard disk
backplane. For details, see
Step 10 Install the fan module brackets in the chassis. See
Figure 7-56 Installing fan module brackets
Step 11 Install the fan modules. For details, see
Step 12 Install the air duct. For details, see
Step 13 Install the chassis cover. For details, see
Step 14 Install the RH2288H V3. For details, see
Step 15 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 16 Power on the RH2288H V3. For details, see
----End

7.27 Removing the Internal USB Flash Drive

Remove the USB flash drive before replacing it with a new one.
Issue 46 (2022-12-28)
NO TE
If fan modules have been installed, remove them and the fan support before tightening the
screws.
Cables.
Copyright © Huawei Technologies Co., Ltd.
2.7 Internal Cabling.
7.16 Installing a Fan
7.14 Installing the Air
7.12 Installing the Chassis
3.4 Installing the
4.1 Powering On the
7 Replacing Parts
Figure
Figure 7-56.
Module.
Duct.
Cover.
Server.
Server.
7-55.
3.5
197