Enabling The Tpm; Usb Flash Drive - Huawei FusionServer G5500 User Manual

FusionServer G5500 Server
User Guide

6.2.7.2 Enabling the TPM

Step 1 Access the BIOS. For details, see
Step 2 Select Security.
Step 3 Select TPM Operation and press Enter.
Step 4 Select Enable and press Enter.
Step 5 Press F10.
The Exit Saving changes? dialog box is displayed.
Step 6 Select Yes and press Enter.
Step 7 Press Esc to exit the BIOS.
Step 8 Restart the G560 for the TPM settings to take effect.
----End

6.2.8 USB Flash Drive

Installing the USB Flash Drive
Step 1 Power off the G560. For details, see
Step 2 Remove the G560. For details, see
Step 3 Place the G560 on the ESD floor.
Step 4 Remove the cover. For details, see Removing the Cover of a G560.
Step 5 Determine the location for installing the USB flash drive. See
Figure 6-16 USB port
Issue 02 (2017-12-15)
5.4.6 Configuring the
3.1 Powering Off the Compute
3.3 Removing the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Optional Part Installation
BIOS.
Node.
G560.
Figure 6-16.
137