Honda SH125 Manual page 296

BRAKE SYSTEM
ASSEMBLY
SNAP RING
r i v u i
DULI
\
I
MASTER PISTON
/
PISTON SPRING
SWITCH
SCREW
Coat the master piston and piston cups with clean
brake fluid.
Install the spring onto the master piston.
DO
not allow the
Install the master piston/spring into the master cyl-
piston cup /ips to
inder.
turn inside out.
Make sure the snap
Install the snap ring into the groove in the master
ring is firmlyseated
cylinder with the chamfered side facing the piston.
in the groove.
TOOL:
Snap ring pliers 07914-SA50001