Honda SH125 Manual page 278

REAR WHEEL/SUSPENSION
ITEM
Minimum tire tread depth
Cold tire Driver only
pressure Driver and passenger
~ - _ _ _ _ _ _
Wheel rim Radial
-
I
runout
Axial
SERVICE INFORMATION
GENERAL
STANDARD SERVICE LIMIT
-
2.0 (0.08)
200 kPa (2.00 kgf/cm2, 29 psi)
225 kPa (2.25 kgf/cm2, 33 psi)
-
-
-
2.0 (0.08)
-
2.0 ( 0
Frequent inhalation of brake shoe dust, regardless of material composition could be hazardous to your health.
Avoid breathing dust particles.
Never use an air hose or brush
to
clean brake assemblies. Use an OSHA-approved vacuum cleaner.
. . .
. .
-
.
A contaminated brake drum or shoe reduces stopping power. Discard contaminated shoes and clean a contaminated
drum with a high quality brake degreasing agent.
Use only tires marked "TUBELESS" and tubeless valve stems on rims marked "TUBELESS TIRE APPLICABLE".
Use genuine Honda replacement bolts for all suspension pivots and mounting points.
Refer to page 16-2 for brake system service.
-.
-
Shock absorber spring pre-load adjuster
I
Middle position
-
TORQUE VALUES
Rear axle nut
TOOLS
118 N.m (12.0 kgf.m, 87 Ibf.ft) U-nut.
Driver
07749-0010000
Attachment, 42 x 47 mm
07746-0010300
Pilot, 17 rnm
07746-0040400
15-3