Honda SH125 Manual page 152

ENGINE REMOVAL/INSTALLATION
ENGINE REMOVAL
Drain the engine oil (page 3-9).
Drain the coolant (page 6-8).
Remove the following:
-
frame body cover (page 2-5)
-
floor lower cover (page 2-8)
- rear fender A (page 2-7)
-
mud guard (page 2-14)
- exhaust system (page 2-15)
- throttle body/ECM assembly (page 5-37)
- fuel injector (page 5-41)
Remove the following:
-
bolt and fuel feed hose
-
wire band (from the engine hanger bracket)
-
wire band (from the wire retaining stay)
-
spark plug cap
- water hose (from the thermostat housing)
- water hose (from the water pump)
- terminal bolt (to disconnect the ground wire and
cable)
- alternator 3P (white) connector (remove from the
frame and disconnect
it)
- alternator wire (release fr om the clamp)
7-4