Honda SH125 Manual page 275

3. Loosen the upper inner race fully and finger
tighten it all the way.
Turn the inner race counterclockwise 45" (1/8)
from above (finger tightened) position.
4. Install the lock nut.
Tighten the lock nut while holding the upper
inner race.
TOOLS:
Socket wrench 07916-KM10000
Lock nut wrench
07SMA-GBC0100
TORQUE: 68 N-m (6.9 kgfmm,
50 Ibf-ft)
Make sure the steering stem moves smoothly,
without play or binding.
Install the brake hose clamp and tighten the bolt.
Install the following:
-
fork legs (page 14-1 8)
-
handlebar (page 14-20)
14-27