Honda SH125 Manual page 264

FRONT WHEEL/SUSPENSION/STEERlNG
ASSEMBLY
Before assembly, wash all parts with a high flash
point or non-flammable solvent and wipe them off
completely.
DUST SEAL FORK TUBE
\
REBOUND
SPRING
SOCKET BOLT
Install the following:
-
rebound spring (onto the fork piston)
-
fork piston (into the fork tube)
-
oil lock piece (onto the fork piston)
Install the fork tube into the fork slider.
Hold the fork slider in a vise with soft jaws or shop
towels.
If the forkpiston
Apply locking agent to the fork socket bolt threads.
turns with the
Install the socket bolt with a new sealing washer
socket bolt, hold
and tighten it.
TORQUE: 20 N-m (2.0 kgf-m, 15 Ibf-ft)
the fork piston with
the fork spring.
FORK TUBE CAP
/
PISTON
RING
SPRING SEAT
PER RING
SPRING SEAT
/
i
FORK SPRING
14-16