Honda SH125 Manual page 113

FUEL SYSTEM (Proqrammed Fuel Injection)
Connect an appropriate fuel hose t o the hose joint
of the fuel pump.
Place the hose end into the an approved gasoline
container.
Turn the ignition switch to ON, let the fuel flow into
the container for 10 seconds and turn the ignition
switch t o OFF.
Measure the amount of fuel flow.
FUEL PUMP FLOW CAPACITY
22 cm3 (0.7 US oz,0.8 Imp o z ) minimum/
10 seconds
If the fuel flow is less than the specified capacity,
replace the fuel pump (page 5-35).
If the fuel flow is normal, inspect the fuel pump sys-
tem (page 5-35).
Connect the fuel feed hose (page 5-32).
install the removed parts in the reverse order of
removal.
5-34