DRIVE AND DRIVEN PULLEYWCLUTCH
~~
I NSTA LLATlO N
Install the drive belt onto the clutch/driven pulley
assembly and drive face boss (page 10-9).
Clean any oil and grease from the clutch outer.
Install the clutch outer, washer and clutch outer nut.
Hold the clutch outer with the special tool and
tighten the clutch outer nut to the specified torque.
TOOL:
Flywheel holder
07725-0040000
TORQUE: 49 N.m (5.0 kgf-m, 36 Ibf-ft)
Install the drive pulley face (page 10-11).